Delta Force hulls have won 9 World Championships over 2000-09.
FE.com chose Delta force because they are straight, strong, sharp
edged hulls with a high quality finish and vice free handling at
race and SAW speeds.
Specifications
Size: 1000mm (39.4") x 315mm (12.4") x 95mm (3.9")
Material: Fiberglass with full gel coat and 4 inch rails
Mass: 1680gm (3.7lb)
Power: 6S-10S / 7.5cc
DF67/10S
Specifications
Size: 1050mm (41.30”) x 310mm (12.2”) x 130mm
Material: Fiberglass with full gel coat and 4
inch rails
Mass 1900gm (4.2lb)
Power 11-13cc or 10S
Specifications
Size : 1125mm (44") x mm x mm
Weight : 2400gm (5.3lb)
Material : Fiberglass w/5” rails
Engine : 15cc Direct Drive or Gas Engine
Fiberglass Hullsby Hydro & Marine -
GERMAN EXCELLENCE AND STRENGTH
Why H&M ?
1. Epoxy build + gel
coat finish = hulls stay straight and strong and weigh less.
2. Light weight + stiffness = better power/weight, acceleration and
handling
3. Excellent handling, monos which don’t dunk & corner on rails, the
XS3 rigger is brilliant out of the box,
the scale hydros handle and fly, the cats are scale beauties
4. Easy building large hatches, toughened stress points & gloss
finish mean less work
5. A full range of accessories; everything from Arneson drives to
full vinyl sets when you need them.
Xzess3 is 90% built. A high quality
carbon fibre/grp epoxy hull offers quality and value.
Exceptional design has created a very fast boat with superb handling
for EA (4S) Hydro.
Specifications
Length: 850 mm
Width: 450 mm
Weight 4S RTR : 1900gm
Motor: Neu 1515
Twin Wing T4 1/8
1/8 Scale raceboat for
32-40 cell or 11cc
A one eight scale model of the 1995 Bud T4 “Twin Wing” hull. A flawless
layup in glass polyester and epoxy.
The T-4’s will run from 89kph to 100 kph (62mph) in oval single pack
setup. On twin packs this lifts to 110 kph (68mph) and with SAW props
they have been recorded as high as 129 kph (80mph) .
Specifications
Length: 1200 mm
Length (w/h’ware): 1300 mm
Width: 590 mm
Weight RTR (max):
Rec’ motors: Neu 2215/ that’s what is going in mine! Plettenberg
370/50A1S is the 2nd stringer
Rec’d engines: 11-15 cc
Competition class: 1/8 Scale
The deep vee hull of excellent design, with smooth handling in all
conditions
This hull is finished in a highly polished white dyed gel coat over
handl aid GRP Epoxy laminate. Built with German excellence and
strength.
Specifications
Type:Deep v-hull in a gel coated GRP/Epoxy
layup
Length: 750 mm
Length (w/h’ware): 855 mm
Width: 240 mm
Weight RTR (max): 2500 g
Recommended motors: 820BB, Neu 1515, Neu 1521
Recommended engines: 3.5cc
Number of cells: 18-24
Competition class: 12-22 cell open mono
$AU309.99
Quantity
XRAY MONO
Race mono for 32-64
cells 15ccm or Zenoah
The BAM boat. On 32 cells a 102 kph (63mph) projectile. Features an
extra large hatch for easy access and installation of single or multi
motor setups.
This hull is finished in a highly polished white dyed gel coat over
hand laid GRP Epoxy laminate.
German excellence and strength
Specifications
Type:Deep vee in gelcoated GRP / Epoxy
laminate
Length: 1240 mm
Length (w/h’ware): 1380 mm
Width: 320 mm
Weight RTR (max): 5000 g
Rec’ motors: Neu 2215, Plett 370/50, Lehner 3020
Number of cells:30 -40
Rec’d engines: .90, 23, 26cc Zenoah
Competition class: X-Mono
$AU499.99
Quantity
Australia
The Scale Driver Figure is a one-piece
casting in lightweight plastic. Weighs only 1.5 oz. Comes unpainted.
$AU
25.00
Quantity
Our Allison V-1710 Engine kits are
easy-to-assemble laser-cut balsa. When finished and painted are very
lightweight and excellent for scale RC hydroplanes. As and example;
the 1/16 scale engine weighs 1/2 ounce unfinished and the 1/10 scale
weighs 1.8 oz painted
Watch this space for 1/12 and 1/10 sizes sizes
Boats which used Allisons Slo Mo V, Miss Burien...
Need something different? Contact us and we'll get it for you!
