AND - Please
vote for this site on the JIL R/C Model Boats top 50
Vote Here
Tape and
Adhesive
Hatch Tape
66 metres of the best
seal available
Zero water entry
Oil and solvent
resistant
Zero adhesive residue
Paint friendly
At 27c per seal (4S
hull) the best insurance you can buy.
Item
Specs
Price
• Velcro,
professional hook and loop tape
• 51mm wide
• High temp adhesive, for batteries
E-Z BOND ADHESIVES
E-Z bond adhesives are
rewriting the book on high quality, multipurpose, instant adhesives.
Low fume levels, clear
setting & non-blooming character make them suitable where the highest
quality and strength are required.
E-Z accelerators are
triple formulated to avoid the crazing and heating which fractures and
weakens CA joins.
Our testers found E-Z
is as good as any on the market. We made sure it delivers the best
possible value to modellers.
Item
Specs
Price
Thin Cyanoacrylate
* 56.8gm bottle
* Ethyl Cyanoacrylate
* Viscosity – 5cps
* Curing time – 3 seconds
* Excellent penetrating capabilities on tight fitting joints & most
materials.
Sets clear without
Medium Cyanoacrylate
* 56.8gm bottle
* Ethyl Cyanoacrylate
* Viscosity -100cps
* Curing time –15 seconds
* Excellent gap filling up to .125 mm.
* The most popular multi purpose CA.
Thick Cyanoacrylate
* 56.8gm bottle
* Ethyl Cyanoacrylate
* Viscosity - 700cps
* Curing time - 45 seconds
* Excellent large gap filling capabilities up to .2mm
* Works well on a wide range of materials.
$AU
10.99
Quantity
Odourless Cyanoacrylate (Medium)
* 28.4gm bottle
* Alkoxy-Alkyl Cyanoacrylate
* Viscosity - 100cps
* Curing time - 15 seconds
* Stabilized to prevent setting and prolong storage life. Excellent gap
filling capabilities. No blooming (white crazing and fractures) on
electrical components, safe on white foam & plastic.
Rubber Toughened Cyanoacrylate (Thick)
* 28.4gm bottle
* Ethyl Cyanoacrylate
* Viscosity - 700cps
* Curing time - 45 seconds
* Excellent ultra gap filling capabilities where flexibility and
vibration resistance Is needed.
$AU
10.99
Quantity
Accelerator
56.8gm bottle + spray
A mild acting accelerator which is safe on foam, plastic & painted
materials.
$AU
6.99
Quantity
Accelerator Refill
237gm bottle
Spare bottle cap and nozzle
$AU2.49
Quantity
Extend tips for very small gap filling
Epoxy
Item
Specs
Price
* 118gm 30-minute Epoxy
* Two 59gm bottles of epoxy & hardener
$AU6.49
Quantity
* 226gm 30-Minute Epoxy
* Two 113gm bottles of epoxy & hardener
$AU11.99
Quantity
Click here for currency converter
Need
something different? Contact us and we'll get it for you!
