Eagle Tree GPS Boat
Recorder.
“Knowledge is power.” Thomas Hobbes, Leviathan, 1650
The Eagle Tree Boat Recorder is the most sophisticated marine data
logger available to modellers. It records 12 variables giving you hours
of information about your boat and its performance and lets you store it
all on computer for playback or analysis.
The Seagull option transmits data live to a dashboard or graph displayed
on your computer screen.
The recorder is big on value too a full size system with the same
recording and display features would cost several thousands of dollars
and require specialist installation.
The Recorder takes up to ten readings per second on each variable
selected including; speed, rpm, temperature, steering and throttle
position and monitors the performance of your radio system and bec or
receiver pack.
Following a run data can be downloaded and displayed on your computer in
seconds. Using the dash or graph option you can replay a race or eyeball
graphed data for peak speeds, acceleration rates, corner speeds and
compare lap times and driver consistency.
The GPS adds the unique features of precise over the ground velocities
and maps the course driven, making it even easier to establish part and
full lap times and speeds and their causes.
Extra sensors allow you to log the performance of fastelectrics or
exhaust gas temps, spark rpm, head temps. This data lets you get the
most from your power system and set up your model for varying water
types, temperature, humidity and pressure variations. A G-Force expander
gives you objective information about your boats stability, acceleration
and attitude. |
|
Item |
Specs |
Price |
| Click here for currency converter |
MicroPower V3 E-Logger w/ leads, 70 Volts,
150 Amp
 |
NEW! Nil
resistance Hall effect sensor; high power handling; more memory for gps,
altitude, airpseed |
|
|
Eagle Tree eLogger V3 +
PowerPanel LCD Display
 |
Combine the power panel
and V3 for a powerful flight logger, and the world's smallest and
lightest watt meter/computerized bench monitor. No need to waste money
on separate watt meters and data loggers. |
|
|
GPS Ready Data Recorder w/USB for marine car
or air

Link to manual
|
* RPM, airspeed, temp, 2
servo channels, glitches, receiver voltage and is GPS ready.
* Accessories monitor speed over ground, long/latitude, course, amps,
pack volts, G-forces, Exhaust Gas Temperatures and more!
* Capable of logging 12+ variables
* Live Mode for real time bench testing
* USB Plug and Play - No new pc drivers needed!
* Fully Compatible with Win 98SE, ME, Win2K and XP™
* Light 45gm with unit and cables
* Simple and quick to install and remove
* Stores data without battery
* Playback in real time
* Excel™ compatible
* Ultra-low power drain 35 mA
*Powerful built-in graphing
* Expansion port for future upgrades, Memory upgraded to 4x’s the
original capacity.
* more accurate voltage and current readings |
|
|
Spektrum(TM) AR9000/ JR 921(TM) Interface Cable
 |
Now use your eLogger V3 to see AR9000/ JR
921 Rx holds/failsafes, lost frames, and antenna fades (up to 4
antennas) on your PowerPanel, or logged for later review!
Connects between your Spektrum "FlightLog" data port and the eLogger
V3's GPS port. Use a servo Y cable to use your FlightLog display
simultaneously!
Click
Here to view Instruction Manual
|
|
|
GPS for data loggers

Link to manual
Press Release in .pdf |
 |
* records speed over ground
* altitude
* latitude
* longitude
* course
Initial release will show numerical data with software upgrades
available in future. |
|
|
|
Brushless Motor RPM Sensor
 |
Tiny sensor measures RPM by simply
connecting a wire from one of your brushless electric motor leads to the
sensor.
NEW: The eLogger V3 supports up to two Hall Effects or Brushless RPM
sensors! |
|
|
Altimeter MicroSensor
 |
Altimeter Sensor measures Altitude from
0-20000 feet (0-6000 m) with approximately 4 foot (2 meter) resolution.
Daisy-chains with all other MicroPower MicroSensors! |
|
|
Airspeed MicroSensor
 |
Measures airspeed from approx 9-200 MPH.
Includes Pitot Tube and hose. |
|
|
|
Electric Expander |
For full size recorder |
|
|
Exhaust Gas Temperature
Expander
|
Measures up to two
channels of EGT up to 2000 degrees F*. Includes thermocouple probe with
compression fitting.
Instructions |
|
|
Custom Y Cable for
Throttle Logging
|
Monitor Throttle or other
servo movements with your eLogger V3! |
|
|
External Hookup Kit
|
Extends USB, LED and
switch functionality to the outside of your vehicle.
Instructions |
|
|
RPM Sensor with 4 magnets
|
|
|
|
Temperature Sensor Loop
 |
|
|
|
Optical RPM Sensor For
eLogger V3 & V2
 |
Measures RPM without need
for installing magnets. Note: This version is for the eLogger V3 and the
V2.
Click here for instruction manual. |
|
|
External Active Antenna
for GPS Expander Module
 |
A small external
waterproof antenna.
For where GPS Expander is under carbon fiber, or other "RF challenging"
locations.
The Expander picks the strongest of the two signals from the built-in or
the External Antenna
Includes cable with MMCX jack.
NOTE: if you purchased your GPS Expander previously, make sure it has a
small "gold" MMCX jack protruding from the shrinkwrap |
|
|
|
 |
 |
 |
|