Charger Accessories
As current doubles the resistance in plugs and wires causes heating to
increase 4 fold.
When a small pressed can motors are replaced with high performance
equipment current draws rise alarmingly. Low resistance connectors and
wiring are critical in avoiding melted connections, shorted packs and
controllers and. Or in ordinary language lost and damaged models.
The plugs and wire we sell are low resistance, tough and proven. They
are excellent value and keep you and your model safe. |
|
Item |
Specs |
Price |
|
PGM-01 |
TP1010C USB Programmer.
Enables The 1010C charger to be updated and programmed |
|
|
|
DLC-250A |
Data link cable to enable
TP chargers and balance to interact during charging. |
|
|
|
TP4P10E |
Balancer jack extension 4
pin 10 extension |
|
|
|
TP6P10E |
Balancer jack extension 6
pin 10 extension |
|
|
|
TP6-P4PE |
Adapts TP 6 pin to TP 4
pin balancer |
|
|
|
TP6-A6S |
Adapts TP pack to Align 6S balancer |
|
|
|
TP4-P3S |
Adapts TP 4 pin to
Polyquest 3S |
|
|
|
TP4P8 |
4-pin balance connector
with 8" colour coded wires |
|
|
|
TP6P13 |
6-pin balance connector
with 8" colour coded wires |
|
|
 |
 |
 |
